HP 4284A - Page 290

MEMory Subsystem
MEMory Subsystem
The MEMory subsystem command group controls the HP 4284A's
data buer. Figure 8-11 shows the command tree of the MEMory
subsystem command group.
Figure 8-11. MEMory Subsystem Command Tree
:DIM
The :DIM command clears the data buer memory, and sets the size
of the data buer memory.For details, refer to \Data Transfer" in
Chapter 7.
Command Syntax
MEMory:DIM DBUF, < value >
Where,
< value > 1 to 128 (NR1) : Number of data sets
Example
OUTPUT 717;"MEM:DIM DBUF,3"
! Specify the DBUF size for 3 sets of measurement data
:FILL
The :FILL command enables the data buer memory to store the
measurement data. After execution of the :FILL command, all
measurement data will b e stored in the data buer memory.For
details, refer to \Data Transfer" in Chapter 7.
Command Syntax
MEMory:FILL DBUF
Example
OUTPUT 717;"MEM:FILL DBUF"
Command Reference 8-49