HP 4284A - Page 293

CORRection Subsystem
:LENGth
The :LENGth command sets the cable length correction setting. The
:LENGth? query returns the current settings of the cable length
correction.
Command Syntax
CORRection:LENGth < value >
Where,
< value > 0 , 1, or 2 is Cable length in [m]
Note
A sux with a sux unit, M (meter), can b e used with this
command.
Example
OUTPUT 717;"CORR:LENG 1M"
Query Syntax
CORRection:LENGth?
Query Response
Returned format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"CORR:LENG?"
20 ENTER 717;A
30 PRINT A
40 END
8-52 Command Reference