HP 4284A - Page 294

COrrection Subsystem
:METHod
The :METHod command sets the correction mo de. The :METHod?
query returns the current settings of the correction mode.
Command Syntax
CORRection:METHod

SINGle
MULTi

Where,
SINGle Sets or returns the single channel correction mo de
MULTi Sets or returns the multi channel correction mo de
Example
OUTPUT 717;"CORR:METH MULT"
Query Syntax
CORRection:METHod?
Query Response
Returned format is :

SING
MULT

<NL^END>
Example
10 OUTPUT 717;"CORR:METH?"
20 ENTER 717;A$
30 PRINT A$
40 END
:OPEN
The :OPEN command executes 51 presetted OPEN correction data
measurement p oints.
Command Syntax
CORRection:OPEN
Example
OUTPUT 717;"CORR:OPEN"
Command Reference 8-53