HP 4284A - Page 295

COrrection Subsystem
:OPEN:STATe
The :OPEN:STATe command sets the OPEN correction function to
ON or OFF. The :OPEN:STATe? query returns the current ON/OFF
condition of the OPEN correction.
Command Syntax
CORRection:OPEN:STATe
8
>
>
<
>
>
:
ON
OFF
1
0
9
>
>
=
>
>
;
Where,
1 (decimal 49) When the function is ON
0 (decimal 48) When the function is OFF
Example
OUTPUT 717;"CORR:OPEN:STAT ON"
Query Syntax
CORRection:OPEN:STATe?
Query Response
Returned format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"CORR:OPEN:STAT?"
20 ENTER 717;A
30 PRINT A
40 END
:SHORt
The :SHORt command executes 51 presetted SHORT correction data
measurement p oints.
Command Syntax
CORRection:SHORt
Example
OUTPUT 717;"CORR:SHOR"
8-54 Command Reference