HP 4284A - Page 299

COrrection Subsystem
:SPOT < n > :STATe
The :SPOT < n > :STATe command sets the sp ecied frequency p oint
correction (FREQ1, FREQ2 or FREQ3) to ON or OFF. The
:SPOT < n > :STATe? query resp onds the current ON/OFF setting of
the sp ecied frequency point correction.
Command Syntax
CORRection:SPOT < n > :STATe
8
>
>
<
>
>
:
ON
OFF
1
0
9
>
>
=
>
>
;
Where,
1 (decimal 49) When the function is ON
0 (decimal 48) When the function is OFF
< n > is:
1 State setting for FREQ1 p oint
2 State setting for FREQ2 p oint
3 State setting for FREQ3 p oint
Example
OUTPUT 717;"CORR:SPOT1:STAT ON"
Query Syntax
CORRection:SPOT < n > :STATe?
Query Response
Returned format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"CORR:SPOT1:STAT?"
20 ENTER 717;A
30 PRINT A
40 END
8-58 Command Reference