HP 4284A - Page 309

COMParator Subsystem
:TOLerance:NOMinal
The :TOLerance:NOMinal command sets the nominal value for
the tolerance mo de of the comparator function. This can be
set only when the limit mo de is set to the tolerance mo de. The
:TOLerance:NOMinal? query returns the current settings of the
nominal value for the tolerance mo de.
Command Syntax
COMParator:TOLerance:NOMinal < value >
Where,
< value > is the NR1, NR2, or NR3 format : nominal value
Example
OUTPUT 717;"COMP:TOL:NOM 100E-12"
Query Syntax
COMParator:TOLerance:NOMinal?
Query Response
Returned Format is :
<NR3><NL^END>
Example
10 OUTPUT 717;"CORR:TOL:NOM?"
20 ENTER 717;A
30 PRINT A
40 END
8-68 Command Reference