HP 4284A - Page 356

Measurement Time
Typical measurement times from the trigger to the output of EOM at
the Handler Interface. (EOM: End of Measurement)
Integ.
Time
Test Frequency
100 Hz 1 kHz 10 kHz 1 MHz
SHORT 270 ms 40 ms 30 ms 30 ms
MEDIUM 400 ms 190 ms 180 ms 180 ms
LONG 1040 ms 830 ms 820 ms 820 ms
Display Time
Display time for each display format is given as
MEAS DISPLAY page approx. 8 ms
BIN No. DISPLAY page approx. 5 ms
BIN COUNT DISPLAY page approx. 0.5 ms
HP-IB Data Output Time
Internal HP-IB data pro cessing time from EOM output to
measurement data output on HP-IB lines (excluding displa
y time).
Approx. 10 ms
General Information 9-23