5. When rack mounting the HP 4284A (3 and 4 above), remove all
four feet (lift bar on the inner side of the fo ot, and slide the fo ot
toward the bar).
Storage and
Repacking
This paragraph describ es the environment for storing or shipping the
HP 4284A, and how to repackage the HP 4284A for shipment when
necessary.
Environment
The HP 4284A should be stored in a clean, dry environment. The
following environmental limitations apply for both storage and
shipment.
Temperature:
0
20
Cto60
C
Humidity:
95% RH (at 40
C)
To prevent condensation from taking place on the inside of the
HP 4284A, protect the instrument against temp erature extremes.
Original Packaging
Containers and packing materials identical to those used in factory
packaging are available through your closest Hewlett-Packard sales
oce. If the instrument is being returned to Hewlett-Packard for
servicing, attach a tag indicating the service required, the return
address, the mo del number, and the full serial numb er. Mark
the container
FRAGILE
to help ensure careful handling. In any
corresp ondence, refer to the instrumentby mo del number and its full
serial number.
Other Packaging
The following general instructions should b e used when repac
king
with commercially available materials:
1. Wrap the HP 4284A in heavy pap er or plastic. When shipping
to a Hewlett-Packard sales oce or service center, attach a tag
indicating the service required, return address, mo del number, and
the full serial number.
2. Use a strong shipping container. A double-walled carton made of
at least 350 p ound test material is adequate.
3. Use enough sho ck absorbing material (3 to 4 inchlayer) around all
sides of the instrument to provide a rm cushion and to prevent
movement inside the container. Use cardb oard to protect the front
panel.
4. Securely seal the shipping container.
5. Mark the shipping container
FRAGILE
to help ensure careful
handling.
6. In any corresp ondence, refer to the HP 4284A b
y mo del number
and by its full serial number.
9-28 General Information