Test Signal
Level/Level-Monitor
Accuracy Test
This test veries the HP 4284A's test signal level, and test signal
level monitor accuracy.
Figure 10-2. Test Signal Level Accuracy Test Setup Using an Interface Box
Figure 10-3. Test Signal Level Accuracy Test Setup Without an Interface Box
Note
The BNC to BNC cables used in this test should b e shorter than 30
cm.
Equipment:
Interface Box HP PN 04284-65007
Multimeter HP 3458A
Cable BNC(m)-to-BNC(m) 30 cm HP PN 8120-1838
BNC(f ) to dual banana plug Adapter HP PN 1251-2277
10-6 Performance Tests
To Next Page
