HP 4284A - Page 383

Store and Load
Function Test
This test veries the HP 4284A's ability to store information to, and
load information from a memory card.
Equipment:
Memory Card HP PN 04278-89001
Procedure:
1. Perform a SYSTEM RESET as describ ed in \System Reset".
2. Insert a memory card into the MEMORY card slot.
3. Display the MEAS SETUP page.
Note
This test should b e p erformed from the MEAS SETUP page.
4. Change the measurement function from Cp-D to Cp-G in the
FUNC eld.
5. Use the CURSOR arrow keys to move the cursor to the SYS
MENU eld.
6. Press the
NNNNNNNNNNNNNNNNN
STORE softkey to store the HP 4284A's con
trol settings
to the memory card as data record-number 10.
7.
Press the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CLEAR SETUP softkey to clear the set up, and then
conrm that FUNC is set to Cp-D .
8.
Press the
NNNNNNNNNNNNNN
LOAD softkey to load data record-number 10 from the
memory card.
9. Conrm that the measurement function is set to Cp-G .
10-20 Performance Tests