HP 435 - Page 27

Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
HP 635 Notebook PC
Energy Consumption 115 VAC 230 VAC 100 VAC
Normal Operation 9.23 W 9.61 W 9.38 W
Sleep (Energy Star low
power mode)
0.82 W 1.00 W 0.81 W
Off 0.54 W 0.69 W 0.53 W
Heat Dissipation * 115 VAC 230 VAC 100 VAC
Normal Operation 31 BTU/hr 33 BTU/hr 32 BTU/hr
Sleep 3 BTU/hr 3 BTU/hr 3 BTU/hr
Off 2 BTU/hr 2 BTU/hr 2 BTU/hr
Declared Noise Emissions
(in accordance with
ISO 7779 and ISO 9296)
System Fan Off Sound Power
(LWAd, bels)
Sound Pressure
(LpAm, decibels)
Idle 2.8 22
Fixed Disk
(random writes)
4 33
The system fan will be on by power consumption
Batteries This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater the 5ppm by weight
Cadmium greater than 10ppm by weight
The battery type and chemistry used in the product is:
CR2032 (coin cell), Li-ion
6-cell high capacity Lithium-Ion battery (optional 8 cell available)
Additional This product is in compliance with the Restrictions of Hazardous Substances
QuickSpecs
HP 435 Notebook PC
HP 635 Notebook PC
Technical Specifications
DA - 13969 Worldwide — Version 13 — February 15, 2012 Page 27