Installing and troubleshooting 13
If the installation program displays a message saying it cannot find USB but you
think you have it, see "If the installation program displays a message saying it
cannot find USB but you think you have it, see "If the installation program displays a
message saying it cannot find USB but you think you have it, see "If the installation
program displays a message saying it cannot find USB but you think you have it, see
. Verifying USB compatibility" on page 13. Verifying USB compatibility" on page 13.
Verifying USB compatibility" on page 13. Verifying USB compatibility
The scanner can be connected to a computer using a USB interface connection. You
can use a USB connection if your computer meets these requirements:
The computer has a USB connector on the back (see below).
The computer is running Microsoft â Windows 98, Windows 2000, or
Windows Me.
Note: USB connections are not supported in Windows 95 and Windows NT 4.0.
In the computer BIOS, USB is enabled. In some older computers, it is disabled.
See the documentation that came with the computer. If you change the BIOS,
restart the computer and reinstall the software.
"" on page 14.
USB port on
the scanner
USB port on
the computer
To Next Page
Loading...