20 Installing and troubleshooting
))
Check to make sure the parallel ports have the correct settings.
Windows 95, Windows 98, and Windows Me:
1 On the Start menu, point to Settings, and click Control Panel.
2 Double-click the System icon.
3 Click the Device Manager tab.
4 Double-click Ports. Verify the numbers listed against the numbers in your
computer documentation.
5 If the scanner still does not work, see "If the parallel port still does not work,
follow these steps (all operating systems):" below.
Windows 2000:
1 On the Start menu, point to Settings, and click Control Panel.
2 Double-click the System icon.
3 On the Hardware tab, click Device Manager.
4 Click on the plus sign next to Ports (COM & LPT), and double-click the ECP
Printer Port. Verify the numbers listed against the numbers in your computer
documentation.
5 If the scanner still does not work, see "If the parallel port still does not work,
follow these steps (all operating systems):" below.
To Next Page
Loading...