ENWW 127
CAUTION Hewlett-Packard recommends the use of HP products in this printer.
Use of non-HP products may cause problems requiring service that is
not covered by the Hewlett-Packard warranty or service agreements.
Making room around the printer for replacing
supplies
The following illustration shows the clearance necessary in front of,
above, and to the side of the printer for replacing supplies.
Supplies replacement clearance diagram
1. 530 mm (20.9 inches)
2. 1294 mm (50 inches)
3. 804 mm (31.7 inches)
1
1
1
2
1
3
To Next Page
Loading...