EasyManua.ls Logo

HP 4600 - Page 48

HP 4600
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34 ENWW
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight TRAY BEHAVIOR.
7. Press ✔ to select TRAY BEHAVIOR.
8. Press ✔ to select USE REQUESTED TRAY.
9. Press or to select EXCLUSIVELY or FIRST.
10. Press ✔ to set the behavior.
11. Press P
AUSE/RESUME.
To set manually feed prompt
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight TRAY BEHAVIOR.
7. Press ✔ to select TRAY BEHAVIOR.
8. Press to highlight MANUALLY FEED PROMPT.
9. Press ✔ to select MANUALLY FEED PROMPT.
10. Press or to select ALWAYS or UNLESS LOADED.
11. Press ✔ to set the behavior.
12. Press P
AUSE/RESUME.
PowerSave Time
The adjustable PowerSave Time feature reduces power consumption
when the printer has been inactive for an extended period. You can
set the length of time before the printer goes into PowerSave mode to
1 MINUTE, 15 MINUTES, 30 MINUTES, or to 1 HOUR, 2 HOURS, or 4 HOURS.
The default setting is 30 MINUTES.