EasyManua.ls Logo

HP 4600 - Page 52

HP 4600
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 ENWW
To set supplies low reporting
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight SUPPLIES LOW.
7. Press ✔ to select SUPPLIES LOW.
8. Press or to select the appropriate setting.
9. Press ✔ to set the selection.
10. Press P
AUSE/RESUME.
Jam recovery
This option allows you to configure the printer response to paper
jams, including how it handles the pages involved. AUTO is the default
value.
z AUTO—the printer automatically turns jam recovery on when
sufficient memory is available.
z ON—The printer reprints any page involved in a paper jam.
Additional memory is allocated to store the last few pages
printed, and this may cause overall printer performance to suffer.
z OFF—The printer will not reprint any page that was involved in a
paper jam. Since no memory is used to store the most recent
pages, performance may be optimal.
To set jam recovery response
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight JAM RECOVERY.
7. Press ✔ to select JAM RECOVERY.
8. Press or to select the appropriate setting.