HP 4600

80 ENWW
To enable or disable 2-sided printing from the printer
control panel
Note Changing settings for 2-sided printing through the printer control panel
affects all print jobs. Whenever possible, change settings for 2-sided
printing through your software application or printer driver.
1. Press ✔ to enter the MENUS.
2. Press  to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press ✔ to select PRINTING.
5. Press  to highlight DUPLEX.
6. Press ✔ to select DUPLEX.
7. Press  or  to select ON to enable 2-sided printing or OFF to
disable 2-sided printing.
8. Press ✔ to set the value.
9. Press P
AUSE/RESUME.
10. Select 2-sided printing from your software application or printer
driver, if possible.
Note To select 2-sided printing from the printer driver, the driver must first be
properly configured. (For instructions, see the online Help for the printer
driver.)