HP 5087A - Page 3

MANUAL CHANGES, MODEL 5087A (05087-90008)
All affected pages
#All Serials
> Change "HP" to "Agilent" throughout
> Change "Hewlett-Packard Company" to "Agilent Technologies" throughout
PAGE 1-2. GENERAL INFORMATION:
All Serials Table 1-1, Specifications:
> Change NON-HARMONIC DISTORTION specifications to read:
Greater than 80 dB below rated output on 100 kHz, 1 MHz and
5 MHz outputs. Greater than 70 dB on 10 MHz outputs.
PAGE 1-5, TABLE 1-4, ASSEMBLIES USED IN THE 5087A DISTRIBUTION AMPLIFIER:
All Serials > Change A1 Power Module from 5060-1189 to 0960-0504.
PAGE 5-9, PERFORMANCE CHECKS, 2. NON-HARMONICALLY RELATED SIGNALS:
All Serials > Insert the following sentence after the first sentence of the paragraph:
Greater than 70 dB on 10 MHz outputs.
PAGE 6-4, TABLE 6-2. A2 POWER SUPPLY ASSEMBLY REPLACEABLE PARTS:
All Serials > Change A2 (05087-60008) SERIES from 1240 to 2208.
PAGE 6-4, TABLE 6-2. A3 MOTHER BOARD REPLACEABLE PARTS:
All Serials > Change A3 HP and Mfr part numbers from 05087-60007 to 05087-60015.
> Change A3 (05087-60015) SERIES from 1620 to 2032.
PAGE 6-5, TABLE 6-2. A6 INPUT PREAMPLIFIER (05087-60005) REPLACEABLE PARTS:
All Serials > Change A6 HP Part Number from 05087-60005 to 05087-60004,
and change CD from 0 to 9.
> Change A6Q1, Q2 and Q4 description to TRANSISTOR SIM 2N2222A.
PAGE 6-6, TABLE 6-2. A7 1 MHZ TO 100 KHZ DIVIDER BOARD (05087-60006):
All Serials > Change A7 description to 1 MHZ TO 100.0 KHZ DIVIDER ASSY (OPTION 006).
> Change A7C2 description to CAPACITOR-FXD 1000 PF 300V.
> Change A7C12 description to CAPACITOR-FXD 8200 PF 1%.
> Change A7Q1, Q2 and Q4 description to TRANSISTOR SIM 2N2222A.
PAGE 6-7, TABLE 6-2. A8 5 MHZ AMPLIFIER (05087-60001) REPLACEABLE PARTS:
All Serials > Change A8T1 and A8T2 description to TRANSFORM RF; 5 MHZ, 14UH PRI IND.