(The printer driver and program
settings override the printer
control panel settings.)
●
By default, paper loaded in tray 1
will be printed first. If you do not
want to print from tray 1, remove
any paper loaded in the tray or
change the USE REQUESTED
TRAY setting. (See
Customizing
tray 1 operation.) Change TRAY 1
SIZE and TRAY 1 TYPE to a
setting other than ANY.
●
If you want to print from tray 1, but
cannot select the tray in a
program, see
Customizing tray 1
operation.
ENWW Troubleshooting flowchart 121
To Next Page
Loading...