Printer model
Printing
2
Ready
3
,
4
Sleep
5
Off
HP LaserJet 5200dtn
625 W
6
11 W 8.5 W 0.4 W
1
Values subject to change. See www.hp.com/support/lj5200 for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
Default time from Ready mode to Sleep = 30 minutes.
4
Heat dissipation in Ready mode = 37.5 BTU/hour.
5
Recovery time from Sleep to start of printing = less than 8.5 seconds.
6
Print speed is 35 ppm.
Acoustic emissions
Table C-5 Sound power and pressure level
1
,
3
Sound power level Declared per ISO 9296
Printing
3
L
WAd
= 6.6 Bels (A) [66 dB(A)]
Ready Essentially Inaudible
Sound pressure level Declared per ISO 9296
Printing
3
L
pAm
=52 dB (A)
Ready Essentially Inaudible
1
Values subject to change. See www.hp.com/support/lj5200 for current information.
2
Configuration tested: base printer, simplex printing with A4 paper size.
3
Print speed is 35 ppm.
Operating environment
Table C-6 Necessary conditions
Environmental condition
Printing Storage/standby
Temperature (printer and print cartridge) 15° to 32.5°C (59° to 89°F) -20° to 40°C (-4° to 104°F)
Relative humidity 10% to 80% 10% to 90%
Table C-4 Power consumption (average, in watts) (continued)
ENWW Acoustic emissions 183
To Next Page
Loading...