HP 5200 Series

To disable IPX/SPX
NOTE Do not disable this protocol in Windows-based systems that print to the printer
through IPX/SPX.
1. Press Menu.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight IPX/SPX, and then press .
6.
Press
to select ENABLE.
7.
Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
To disable AppleTalk
1. Press Menu.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight APPLETALK, and then press .
6.
Press
to select ENABLE.
7.
Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
To disable DLC/LLC
1. Press Menu.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight I/O, and then press .
4.
Press
to highlight EMBEDDED JETDIRECT, and then press .
5.
Press
to highlight DLC/LLC, and then press .
6.
Press
to select ENABLE.
7.
Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
54 Chapter 3 Input/output (I/O) configuration ENWW