Copyright Hewlett-Packard
Company 1994, 1995,1997
All Rights Reserved.
Reproduction, adaptation, or
translations without prior written
permission is prohibited, except
as allowed under the copyright
laws.
Printed: June 1997
Printed in USA
Manual part number
53181-90002
Certification
and Warranty
Certification
Hewlett-Packard Company
certifies that this product met its
published specification at the
time of shipment from the
factory. Hewlett-Packard further
certifies that its calibration
measurements are traceable to the
United States National Institute
of Standards and Technology
(formerly National Bureau of
Standards), to the extent allowed
by the Institute's calibration
facility, and to the calibration
facilities of other International
Standards Organization
members.
Warranty
This Hewlett-Packard instrument
product is warranted against
defects in material and
workmanship for a period of
three years from date of
shipment. During the warranty
period, Hewlett-Packard
Company will, at its option,
either repair or replace products
which prove to be defective.
For detailed warranty
information, see back matter.
Safety Considerations
General
This product and related
documentation must be reviewed
for familiarization with this
safety markings and instructions
before operation.
This product is a safety Class I
instrument (provided with a
protective earth terminal).
Before Cleaning
Disconnect the product from
operating power before cleaning.
Before Applying Power
Verify that the product is set to
match the available line voltage
and the correct fuse is installed.
Refer to instructions in Chapter 1
(page 1-11) of the Manual.
Safety Earth Ground
An uninterruptible safety earth
ground must be provided from
the mains power source to the
product input wiring terminals or
supplied power cable.
Warning Symbols That May
Be Used In This Book
Instruction manual symbol; the
product will be marked with this
symbol when it is necessary for
the user to refer to the instruction
manual.
Indicates hazardous voltages.
Safety Considerations
(contd)
Indicates earth (ground) terminal.
or
Indicated terminal is connected to
chassis when such connection is
not apparent.
Indicates Alternating
current.
Indicates Direct current.
WARNING
BODILY INJURY OR DEATH
MAY RESULT FROM
FAILURE TO HEED A
WARNING. DO NOT
PROCEED BEYOND A
WARNING SIGN UNTIL THE
INDICATED CONDITIONS
ARE FULLY UNDERSTOOD
AND MET.
CAUTION
Damage to equipment, or
incorrect measurement
data, may result from
failure to heed a caution. Do
not proceed beyond a
CAUTION sign until the
indicated conditions are
fully understood and met.
For additional safety and
acoustic noise information, see
back matter.
Hewlett-Packard Company
Santa Clara Division
5301 Stevens Creek Boulevard
Santa Clara, California 95052-8059
To Next Page
Loading...
Need help?
General
