Chapter 2 Printing Tasks 111
Selecting the Output Bin
Note For the types of paper the printer supports, see page 397
). Envelopes,
labels, and transparencies should only be sent to the Face-up Bin.
The stapler is located on the left side of the 5-bin Mailbox with Stapler. The
stapler can staple jobs of 2 to 20 sheets up to 28 lb paper. The stapler bin can
hold a maximum of 350 sheets. Only jobs sent to the stapler bin will be
stapled.
Selecting a Mailbox through the Software
You can select mailboxes through your software application, printer driver, or
from the printer control panel. Otherwise, follow the instructions below for
setting the overall default printer output bin selection. Where and how you
make selections depends on your software application or associated printer
driver. (Some options may only be available through the printer driver.)
8-bin Mailbox FACE UP BIN Face-up Bin
OPTIONAL BIN 1 Mailbox 1-8
In Job Separation, Collator,
and Stacking Modes, if the
Control Panel setting is: Then the physical location is:
To Next Page
Loading...