Appendix A Specifications 404
Paper Specifications
Label Construction
When selecting labels, consider the quality of each component:
! Adhesives: The adhesive material should be stable at 392° F (200° C), the
printer’s maximum fusing temperature.
! Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets with spaces between the labels, causing serious
jams.
! Curl: Prior to printing, labels must lie flat with no more than 0.5 inch
(13 mm) of curl in any direction.
! Condition: Do not use labels with wrinkles, bubbles, or other indications of
separation.
To print sheets of labels, see page 135
.
To Next Page
Loading...