Appendix A Specifications 405
Paper Specifications
Transparencies
Note For best results, use only Tray 1 and the Face-up Bin.
CAUTION Transparencies used in the printer must be able to withstand 392° F
(200° C), the printer’s maximum fusing temperature. To avoid damaging
the printer, use only transparencies recommended for use in laser
printers.
Do not print on both sides of labels, transparencies, envelopes, custom
paper, or paper heavier than 28 lb (105 g/m
2
). Damage to the printer and
paper jamming might result.
If you have problems printing transparencies, use Tray 1.
To print transparencies, see page 137
.
To Next Page
Loading...