Safety Considerations
Before operation, you should review the instrument and manual, including the
red safety page, for safety markings and instructions.You must follow these to
ensure safe operation and to maintain the instrument in safe condition.
Initial Inspection
Warning
To avoid hazardous electrical shock, do not perform
electrical tests when there are signs of shipping damage to
any portion of the outer enclosure (covers, panels, etc.).
Power Requirements
The HP 81536A will operate when installed into the HP 8153A Optical
Multimeter mainframe.
Input/Output Signals
Caution
A maximum of 15V can be applied as an external voltage to any
BNC connectors.
iii
To Next Page
Loading...
