Need help?Do you have a question about the HP 81536A and is the answer not in the manual?
Review safety markings and instructions for safe operation.
Covers power requirements and safe input/output signal voltage limits.
Describes non-warranted typical performance and adds 1% to total uncertainty.
Details bandwidth, output voltage, impedance, and max input voltage.
Overview of performance tests and list of required equipment.
Covers test record usage and procedure for test failure.
References instrument specifications, mainly in Appendix C.
Introduces Accuracy, Linearity, and Noise tests.
Details test setup, specifications, and warm-up for accuracy and linearity.
Step-by-step guide for performing the accuracy test.
Step-by-step guide for performing the linearity test.
Step-by-step guide for performing the noise measurement.
Lists items for a full cleaning kit: Isopropyl alcohol, Cotton-swabs, Soft-tissues.
Details usage and precautions for pipe-cleaners and compressed air.
Lists additional tools for cleaning devices like microscopes and wipes.
Hints on how to keep connectors in the best possible condition.
Detailed procedures for cleaning cable connectors.
Guidelines and procedures for cleaning connector adapters.
Procedures for cleaning connector interfaces.
Methods for cleaning light and heavy dirt on recessed lens interfaces.
General| Brand | HP |
|---|---|
| Model | 81536A |
| Category | Security Sensors |
| Language | English |
To Next Page
