HP 81536A - HP 81536 A Performance Tests; Introduction and Equipment Required

D
D
HP 81536A Performance Tests
Introduction
The procedures in this section test the performance of the instrument.
The complete specications to which the HP 81536A is tested are given in
Appendix C. All tests can be performed without access to the interior of the
instrument. The test equipment given corresponds to tests carried out with
Diamond HMS-10/HP conectors.
Equipment Required
Equipment required for the performance test is listed in the table below. Any
equipment which satises the critical specications of the equipment given in
the table, may be substituted for the recommended models.
HP 81536A Performance Tests D-1