HP 8444A - Page 11

Model
8444A
General
Information
Table 1-3. Test Equipment and Accessories (3 of 3)
Minimum Specifications Suggested Model Use*
Open-end, 5/16-inch HP 8720-0030 AT
AT
No. 10 Allen Driver HP 5020-0291
Test lead with alligator clips
*P = Performance Test; A = Adjustments; T = Troubleshooting
Table 1-4. Operating Accessories
HP 8554B RF Section Spectrum Analyzer RF Section with frequency range of 500 kHz to 1250 MHz. |
Model Number
RF Section Spectrum Analyzer RF Section with frequency range of .01 to 18 GHz. When
used with Tracking Generator, covers frequency range of 10 to 1300 MHz.
HP 8555 A
HP 140T Display
Section
HP 141T Display
Section
HP 8552A IF Section Spectrum Analyzer IF Section compatible with Tracking Generator, 10 dB
per division log range.
HP 8552B “IF Section Spectrum Analyzer IF Section compatible with Tracking Generator, 2 dB per
division log range.
HP 5300A/ Frequency For precision frequency measurements to 500 MHz.
5303A Counter
HP 5245L/ Frequency For precision frequency measurements over frequency range of 0 to 50 MHz
5254C Counter and 150 to 3000 MHz.
HP 5060-8543 Joining
Bracket Kit
HP 8120-1575
HP 8120-1576
Spectrum Analyzer Display Section compatible with Tracking Generator.
Speetrum Analyzer Display Section with storage CRT display capability.
Compatible with Tracking Generator.
Hardware and parts for strapping Tracking Generator to Spectrum Analyzer.
Provides a common ground and secure mounting.
Accessory
Power Cord
For accessory instrument operation off of line input to Tracking Generator.
Plugs mate with accessory outlet connector and line input connector on
HP 5060-1189 power line module. l
Accessory
Power Cord
For accessory instrument operation off of line input to Tracking Generator, |
Plugs mate with accessory outlet connector and line input connector
HP 1251-0148 (old type).
1-7/1-8