To Next PageTo Next Page
Need help?Do you have a question about the HP 3335A and is the answer not in the manual?
Notice regarding manual updates and backdating information.
Warning to prevent fire or shock hazard by avoiding rain or moisture.
Certification of product specifications and calibration traceability.
Details on product warranty, repair, limitations, and exclusive remedies.
Information on obtaining product maintenance and customer assistance.
Introduces the manual and provides an overview of its contents.
Covers instrument description, key specs, and operating characteristics.
Lists equipment and accessory options available for the 3335A.
Lists supplied and available accessories for the 3335A.
Instructions for interfacing the 3335A with the HP-IB.
Covers instrument ID, manual ID, and safety precautions.
Lists equipment recommended for maintaining the Model 3335A.
Details output impedance, frequency range, resolution, amplitude range, and settling time.
Covers sweep modes, HP-IB interface, and programmability.
Features for telecommunications applications like amplitude blanking.
Covers operating temperature, power, dimensions, and weight.
Overview of installation, inspection, and preparation for use.
Covers power requirements and line voltage/fuse selection.
Details on HP-IB connector, cable length, and listen address.
Provides a description of the HP-IB concept and standards.
Specifies environmental limits, cooling system, and thermal cutout.
Instructions for bench setup and rack mounting.
Guidelines for storing and shipping the instrument, including packaging.
Overview of operating instructions and description of front/rear panel controls.
Covers power-up, modes of operation, and general operating procedures.
Details operator maintenance limited to fuse replacement.
Describes the FUNCTION keys used to display operating parameters.
Explains the use of DATA keys for entering new operating parameters.
Describes the INCR keys for changing frequency, amplitude, or phase.
Explains the FREQUENCY keys for manual tune and sweep modes.
Explains how to use the SWEEP subgroup for automatic or manual sweeps.
Instructions for entering the desired output frequency.
Lists the default output parameters when the instrument is turned on.
Instructions for programming the frequency increment value.
Instructions for entering the desired output amplitude.
Instructions for programming the amplitude increment value.
Instructions for programming the phase increment value.
How to program the amplitude increment value.
How to program the phase increment value.
Describes preset registers, storing, and merging data.
How to recall individual parameters from preset registers.
Explains how phase increment displays and indicators work.
Instructions for programming the sweep width for frequency sweeps.
Recalls the last entry made to the display.
How to manually tune the frequency using the front panel knob.
Details the GO TO START FREQ, START SINGLE, and START AUTO keys.
Explains STOP key, SWEEP OUTPUT, and mode indicators.
Explains HP-IB indicators and the LOCAL key for returning to local control.
Details front panel outputs and rear panel BNC connectors.
Describes the EXT LEVEL INPUT for controlling output amplitude.
Overview of HP-IB operation and programming for remote control.
Covers HP-IB system, logic levels, isolation, and capabilities.
Lists and describes HP-IB bus messages by function.
Explains how the REN line controls remote operation mode.
Explains how instruments are addressed and the 3335A's listener role.
Instructions for changing and unaddressing the HP-IB listen address.
Covers HP-IB bus commands and the overview of programming via HP-IB.
Details special attenuator codes and programming response.
How to program frequency, amplitude, and phase increments.
Tips for attenuator life and effects of local/unaddressed HP-IB operation.
Explains amplitude blanking and the telecommunications sweep feature.
Notice regarding manual updates and backdating information.
Warning to prevent fire or shock hazard by avoiding rain or moisture.
Certification of product specifications and calibration traceability.
Details on product warranty, repair, limitations, and exclusive remedies.
Information on obtaining product maintenance and customer assistance.
Introduces the manual and provides an overview of its contents.
Covers instrument description, key specs, and operating characteristics.
Lists equipment and accessory options available for the 3335A.
Lists supplied and available accessories for the 3335A.
Instructions for interfacing the 3335A with the HP-IB.
Covers instrument ID, manual ID, and safety precautions.
Lists equipment recommended for maintaining the Model 3335A.
Details output impedance, frequency range, resolution, amplitude range, and settling time.
Covers sweep modes, HP-IB interface, and programmability.
Features for telecommunications applications like amplitude blanking.
Covers operating temperature, power, dimensions, and weight.
Overview of installation, inspection, and preparation for use.
Covers power requirements and line voltage/fuse selection.
Details on HP-IB connector, cable length, and listen address.
Provides a description of the HP-IB concept and standards.
Specifies environmental limits, cooling system, and thermal cutout.
Instructions for bench setup and rack mounting.
Guidelines for storing and shipping the instrument, including packaging.
Overview of operating instructions and description of front/rear panel controls.
Covers power-up, modes of operation, and general operating procedures.
Details operator maintenance limited to fuse replacement.
Describes the FUNCTION keys used to display operating parameters.
Explains the use of DATA keys for entering new operating parameters.
Describes the INCR keys for changing frequency, amplitude, or phase.
Explains the FREQUENCY keys for manual tune and sweep modes.
Explains how to use the SWEEP subgroup for automatic or manual sweeps.
Instructions for entering the desired output frequency.
Lists the default output parameters when the instrument is turned on.
Instructions for programming the frequency increment value.
Instructions for entering the desired output amplitude.
Instructions for programming the amplitude increment value.
Instructions for programming the phase increment value.
How to program the amplitude increment value.
How to program the phase increment value.
Describes preset registers, storing, and merging data.
How to recall individual parameters from preset registers.
Explains how phase increment displays and indicators work.
Instructions for programming the sweep width for frequency sweeps.
Recalls the last entry made to the display.
How to manually tune the frequency using the front panel knob.
Details the GO TO START FREQ, START SINGLE, and START AUTO keys.
Explains STOP key, SWEEP OUTPUT, and mode indicators.
Explains HP-IB indicators and the LOCAL key for returning to local control.
Details front panel outputs and rear panel BNC connectors.
Describes the EXT LEVEL INPUT for controlling output amplitude.
Overview of HP-IB operation and programming for remote control.
Covers HP-IB system, logic levels, isolation, and capabilities.
Lists and describes HP-IB bus messages by function.
Explains how the REN line controls remote operation mode.
Explains how instruments are addressed and the 3335A's listener role.
Instructions for changing and unaddressing the HP-IB listen address.
Covers HP-IB bus commands and the overview of programming via HP-IB.
Details special attenuator codes and programming response.
How to program frequency, amplitude, and phase increments.
Tips for attenuator life and effects of local/unaddressed HP-IB operation.
Explains amplitude blanking and the telecommunications sweep feature.
General| Brand | HP |
|---|---|
| Model | 3335A |
| Category | Portable Generator |
| Language | English |
