HP ESG Series User Manual

Printed in USA July 2004
Notice
Hewlett-Packard to Agilent Technologies Transition
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. To reduce potential confusion, the only
change to product numbers and names has been in the company name prefix: where a
product name/number was HP XXXX the current name/number is now Agilent XXXX. For
example, model number HP 8648 is now model number Agilent 8648.
Contacting Agilent Sales and Service Offices
The sales and service contact information in this manual may be out of date. The latest
service and contact information for your location can be found on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, contact your field engineer. In any correspondence
or telephone conversation, refer to your instrument by its model number and full serial
number.

HP ESG Series Specifications

General

Brand	HP
Model	ESG Series
Category	Portable Generator
Language	English

Summary

Notice

Hewlett-Packard to Agilent Technologies Transition

Explains the transition of Hewlett-Packard's businesses to Agilent Technologies.

Contacting Agilent Sales and Service Offices

Provides information on how to contact sales and service offices.

Preparing for Use

Installing the Signal Generator

Procedures for properly installing the signal generator.

Meeting Electrical and Environmental Requirements

Specifies voltage, frequency, power, and environmental conditions.

Display and Screen Saver Configuration

Covers display contrast, inverse video, and screen saver settings.

Selecting Signal Generator Configuration

Details setting HP-IB address and programming language.

Verifying Signal Generator Operation

Procedures for performing daily functional checks and error verification.

Using Functions

Setting Frequency and Power Levels

Instructions on setting RF frequency and output power levels.

Setting Up Internally-Generated Amplitude Modulation

Configuration steps for AM modulation.

Setting Up Internally-Generated Frequency Modulation

Configuration steps for FM modulation.

Creating a Step Sweep and a List Sweep

Procedures for setting up sweep operations.

Saving and Recalling an Instrument State

How to save and recall instrument settings.

Troubleshooting

If You Encounter a Problem

Symptom-based guide for common operational issues.

Error Messages

Explanation of error reporting and queues.

Querying the Error Queue

How to retrieve error information from the queue.

SCPI Standard Error Messages

Lists and explains standard SCPI error codes.

Command Error

Details errors related to IEEE 488.2 syntax and commands.

Execution Error

Details errors related to command execution and device state.

Device-Specific Error

Details errors specific to the instrument's hardware or firmware.

Query Error

Details errors related to message exchange protocol.

ESG Series Signal Generator Instrument-Specific Error Messages

Lists specific errors for the ESG series.

Front and Rear Panel

Front Panel Overview

Description of front panel keys, connectors, and display elements.

Display Annotation

Explanation of display areas and annunciators.

Rear Panel Overview

Description of rear panel connectors and interfaces.

Hardkey and Softkey Reference

AM

Details Amplitude Modulation parameters and softkeys.

Ampl

Details Amplitude settings and related functions.

FM

Details Frequency Modulation parameters and softkeys.

Phase Modulation

Details Phase Modulation parameters and softkeys.

Pulse

Details Pulse Modulation parameters and softkeys.

Sweep/List

Configures frequency, amplitude, and dwell time for sweeps.

Utility

Accesses system settings, memory management, and diagnostics.

Options and Accessories

Signal Generator Options

Lists optional features and accessories for the signal generator.

Signal Generator Accessories

Describes available accessories like transit cases and cables.

Upgrade and Retrofit Kits

Details kits for upgrading or retrofitting features.

Safety and Regulatory

Safety Notes

Explains CAUTION and WARNING statement definitions.

Instrument Markings

Identifies safety symbols and labels on the instrument.

General Safety Considerations

Provides essential safety precautions for operation.

Statement of Compliance

Declares adherence to relevant safety standards.

Warranty

Outlines product warranty terms and limitations.

Assistance

Information on obtaining customer support and service.

Certification

Certifies product specifications and calibration traceability.

Declaration of Conformity

States compliance with regulatory requirements.

Compliance with German Noise Requirements

Details acoustic noise emission levels as per German regulations.

Specifications

HP ESG Series Signal Generators Specifications

Lists warranted performance and environmental range.

Frequency

Details frequency range, resolution, and accuracy.

Output

Details output power range, resolution, and accuracy.

Spectral Purity

Provides SSB phase noise and harmonic specifications.

Frequency Modulation

Specifies deviation, resolution, accuracy, and response.

Phase Modulation

Specifies deviation, resolution, accuracy, and response.

Amplitude Modulation at fc > 500 kHz

Details AM specifications above 500 kHz.

Pulse Modulation

Details pulse modulation parameters like ratio and width.

Internal Modulation Source

Describes modulation signal sources and waveforms.

General

Covers power, temperature, shock, vibration, and dimensions.

Options

Lists available hardware and software options.