HP ESG Series - Noise; Ramp; Sine

5-48
Hardkey and Softkey Reference
FM
Noise
This softkey lets you specify noise as the frequency modulation waveform for the
FM Path 1 and FM Path 2 configurations. Notice that the selected waveform applies
only to whichever FM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM, More (1 of 2), FM Waveform, Noise
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe NOISe
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Ramp
This softkey lets you specify ramp as the frequency modulation waveform for the
FM Path 1 and FM Path 2 configurations. Notice that the selected waveform applies
only to whichever FM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM, More (1 of 2), FM Waveform, Ramp
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe RAMP
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Sine
This softkey lets you specify sine as the frequency modulation waveform for the
FM Path 1 and FM Path 2 configurations. Notice that the selected waveform applies
only to whichever FM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM, More (1 of 2), FM Waveform, Sine
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe SINE
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe?