5-179
Hardkey and Softkey Reference
Utility
Memory Catalog
Pressing this softkey displays the catalog of user files. In addition, it reveals a
menu for choosing the type of files that are displayed and for file management. In
this menu you can choose to display files by type (all files, instrument state files
only, or binary files only), and you can copy and delete files.
Softkey Location: Press
Utility, Memory Catalog
Mod Status Info Off On
Press this softkey to toggle on and off the modulation status display. When the
modulation status is set to on, information about the status of all of the
modulations available is shown at any time that you have accessed one of the
modulation menus. When the modulation status is set to off, the information about
the status of all the modulations is never displayed.
Softkey Location: Press
Utility, Instrument Info/Help Mode, ModStatusInfoOffOn
Status after Normal Preset: On
Off
Press this softkey to turn the RTS line off. In this mode, the instrument will ignore
the state of the CTS line (3-wire connection). This setting is not compatible with
the HP 83300A Remote Interface.
RTS is a persistent state; it is not affected by an instrument preset or by a power
cycle.
Softkey Location: Press
Utility, HP-IB/RS-232, RS-232 Pace, RTS/CTS, Off
SCPI Commands:
:SYSTem:COMMunicate:SERial:CONTrol:RTS OFF
:SYSTem:COMMunicate:SERial:CONTrol:RTS?
Page Down
Press this softkey to move down one page at a time in the displayed catalog of
files.
Softkey Location:
Utility, Memory Catalog, Page Down or press Utility,
Memory Catalog, Goto Row, Page Down
To Next Page
Loading...
