HP ESG Series - Noise; Ramp; Sine

5-111
Hardkey and Softkey Reference
Phase Modulation
Noise
This softkey lets you specify noise as the phase modulation waveform for the
ΦMPath1 and ΦMPath2 configurations. Notice that the selected waveform
applies only to whichever
ΦM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM hardkey, toggle FM/ΦM softkey to ΦM, press
More (1 of 2), ΦM Waveform, Noise
SCPI Commands:
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe NOISe
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Ramp
This softkey lets you specify ramp as the phase modulation waveform for the
ΦMPath1 and ΦMPath2 configurations. Notice that the selected waveform
applies only to whichever
ΦM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM hardkey, toggle FM/ΦM softkey to ΦM, press
More (1 of 2), ΦM Waveform, Ramp
SCPI Commands:
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe RAMP
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Sine
This softkey lets you specify sine as the phase modulation waveform for the
ΦMPath1 and ΦMPath2 configurations. Notice that the selected waveform
applies only to whichever
ΦM path configuration you have currently selected.
Softkey Location: Press
FM/ΦM hardkey, toggle FM/ΦM softkey to ΦM, press
More (1 of 2), ΦM Waveform, Sine
SCPI Commands:
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe SINe
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe?