5-142
Hardkey and Softkey Reference
Save
Softkey Location: Press Save, Add Comment To Seq[n] Reg[nn]
SCPI Commands:
:MEMory:STATe:COMMent <reg_num>,<seq_num>,<comment>
:MEMory:STATe:COMMent? <reg_num>,<seq_num>
Clear Text
Press this softkey to delete the comment text in the active entry area. If you want
to change the comment text saved with a register, use this softkey to quickly
delete the existing text, then use the remaining editing features to enter a new
comment.
Softkey Location: Press
Save, Add Comment To Seq[n] Reg[nn], Editing Keys,
Clear Text
Delete All Regs in Seq [n]
Press this softkey to delete the data saved in all of the registers of the selected
sequence. Do not press this softkey until you have selected the correct sequence
using the
Select Seq softkey. For example, if you want to delete all of the registers
that are saved in sequence 4, press
Select Seq. The currently selected sequence is
displayed in the active entry area. Change the number to 4 using the up and down
arrow keys, the front panel knob, or enter a 4 using the numeric keypad and press
the
Enter terminator softkey. Sequence 4 is now displayed in all softkeys which
specify a sequence in this menu. Now press
Delete All Regs in Seq [4] and the data
in all of the registers stored in sequence 4 will be deleted. Be certain that you want
to delete the data; you cannot recover it once deleted.
NOTE: This softkey has exactly the same function as the softkey with the identical name in the front
panel Recall key menu.
Softkey Location: Press Save, Delete All Regs in Seq [n]
To Next Page
Loading...
Need help?
General
