HP ESG Series - Noise; Ramp; Sine

5-17
Hardkey and Softkey Reference
AM
Noise
This softkey lets you specify noise as the amplitude modulation waveform for the
AM Path 1 and AM Path 2 configurations. Notice that the selected waveform
applies only to whichever AM path configuration you have currently selected.
Softkey Location: Press
AM, AM Waveform, Noise
SCPI Commands:
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe NOISe
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Ramp
This softkey lets you specify ramp as the amplitude modulation waveform for the
AM Path 1 and AM Path 2 configurations. Notice that the selected waveform
applies only to whichever AM path configuration you have currently selected.
Softkey Location: Press
AM, AM Waveform, Ramp
SCPI Commands:
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe RAMP
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe?
Sine
This softkey lets you specify sine as the amplitude modulation waveform for the
AM Path 1 and AM Path 2 configurations. Notice that the selected waveform
applies only to whichever AM path configuration you have currently selected.
Softkey Location: Press
AM, AM Waveform, Sine
SCPI Commands:
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe SINE
[:SOURce]:AM[1]|2:INTernal[1]:FUNCtion:SHAPe?