5-180
Hardkey and Softkey Reference
Utility
Page Up
Press this softkey to move up one page at a time in the displayed catalog of files.
Softkey Location:
Utility, Memory Catalog, Page Up or press Utility,
Memory Catalog, Goto Row, Page Up
Power On Last Preset
This softkey toggles the power-on state of the signal generator between Last and
Preset.
• If you choose Last, each time you cycle power to the signal generator it will turn
on in the same condition as when you turned power off. The signal generator
must not receive commands for a second before the power is turned off to
guarantee that the most recent state is saved.
• If you choose Preset, each time you cycle power to the signal generator it will
turn on in either the factory-defined preset condition or in a user-defined preset
condition. You make the choice between factory- and user-defined preset with
the
Preset Normal User softkey.
The power-on state is a persistent state; it is not affected by an instrument preset
or by a power cycle.
Softkey Location: Press
Utility, Power On/Preset, Power On Last Preset
SCPI Commands:
:SYSTem:PON:TYPE PRESet|LAST
:SYSTem:PON:TYPE?
Power On/Preset
Pressing this softkey reveals a menu of choices for preset conditions. In this menu,
you have the following options:
• Set the signal generator to power on in the same state as it was when you powered off,
or to power on in the instrument preset state. (Refer to the
Power On Last Preset
softkey description, in this section.)
• Set the signal generator to preset to a factory-defined state or to a user-defined state.
(Refer to the
Preset Normal User softkey description, in this section.)
• Set up your own user-defined preset state. (Refer to the
Save Use Preset softkey
description, in this section.)
• Set the signal generator to preset to the SCPI programming language or to an HP 8648
To Next Page
Loading...
