5-135
Hardkey and Softkey Reference
Recall
Select Seq
Press this softkey to choose a sequence for all softkeys which specify a sequence
in this menu. For example, if you want to select sequence 4, press
Select Seq. The
currently selected sequence is displayed in the active entry area. Change the
number to 4 using the up and down arrow keys, the front panel knob, or enter a 4
using the numeric keypad and press the
Enter terminator softkey. Sequence 4 is
now displayed in all softkeys which specify a sequence in this menu. There are
100 registers available (0 through 99) in each of 10 (0 through 9) sequences. You
can use these registers in any combination so long as the total number of registers
used does not exceed 50.
NOTE: The actual number of states that can be saved may be less if the user file system has
non-instrument state files stored such as sweep/list sequences.
Softkey Location: Press Recall, Select Seq
To Next Page
Loading...
