5-173
Hardkey and Softkey Reference
Utility
Delete All Files
Press this softkey to delete all of the files in the displayed catalog of files. You will
then confirm that you want to delete all of the files (binary, instrument state, and
list files) in memory. Press the
Confirm Delete Of All Files terminator softkey and
all of the files are deleted. You cannot recover the files after this step. If you have
changed your mind and do not wish to delete the files, press the
Return front panel
hardkey instead. This softkey does not affect the persistent state or calibration
information. If power on mode is set to last, a new last state file will be created
when the instrument idles.
Softkey Location: Press
Utility, Memory Catalog, Catalog Type, All, More (1 of 2),
Delete All Files
SCPI Commands:
:MEMory:DELete:ALL
Delete All List Files
Press this softkey to delete all of the list files in the displayed catalog of files. You
will then confirm that you want to delete all of the list files in memory. Press the
Confirm Delete Of List Files terminator softkey and all of the list files are deleted.
You cannot recover the files after this step. If you have changed your mind and do
not wish to delete the file, press the
Return front panel hardkey instead.
Softkey Location: Press
Utility, Memory Catalog, Catalog Type, List, More (1 of 2),
Delete All List Files
SCPI Commands:
:MEMory:DELete:LIST
Delete All State Files
Press this softkey to delete all of the instrument state files in the displayed catalog
of files. You will then confirm that you want to delete all of the instrument state
files in memory. Press the
Confirm Delete Of State Files terminator softkey and all
of the files are deleted. You cannot recover the files after this step. If you have
changed your mind and do not wish to delete the files, press the
Return front panel
hardkey instead.
Softkey Location: Press
Utility, Memory Catalog, Catalog Type, State, More (1 of 2),
Delete All State Files
To Next Page
Loading...
