5-151
Hardkey and Softkey Reference
Sweep/List
Delete File
Press this softkey to delete a file in the catalog listing. Use the up and down arrow
keys until the file you wish to delete is highlighted. Press
Delete File and then
press the
Confirm Delete softkey. Be certain that you want to delete the file; you
cannot recover this sweep data once you press
Confirm Delete. If you do not want
to delete the file, press
Return instead of Confirm Delete.
Softkey Location: Press
Sweep/List, Configure List Sweep, More (1 of 2),
Load/Store, Delete File
Delete Item
Press this softkey to delete an item in the displayed list of sweep points. Use the
arrow keys until the desired item is highlighted. Then press
Delete Item to
eliminate this item from the sweep list. Be certain that you want to delete this
item; you cannot recover it once you have deleted it. If the last item in a list is
deleted, it is replaced by the default value.
Softkey Location: Press
Sweep/List, Configure List Sweep, Delete Item
Delete Row
Press this softkey to delete a selected row in the sweep list. Use the up and down
arrow keys until any item is selected in the row you wish to delete. Press
Delete Row and the entire row is deleted. Be certain that you want to delete the
row; you cannot recover this sweep data once you press
Delete Row. If the last row
in a list is deleted, it is replaced by the default value.
Softkey Location: Press
Sweep/List, Configure List Sweep, Delete Row
Dwell Type List Step
Press this softkey to toggle the dwell time for the list sweep points between the
values defined in the list sweep and the value set for step sweep. Choose
List to
sweep with dwell times that you have defined in the list sweep. Choose
Step and
you will sweep each point in the list with a dwell time set by the
Step Dwell
softkey in the Configure Step Sweep menu. When you are sweeping using the step
sweep dwell time, the list sweep dwell time values are grayed out to indicate that
they are not being used.
To Next Page
Loading...
Need help?
General
