5-131
Hardkey and Softkey Reference
Pulse
Pulse Source
Pressing this softkey reveals a menu of choices for pulse modulation sources. You
can choose internally-generated pulse modulation, internally-generated square
pulse modulation, or select an externally-applied, DC-coupled signal from the
EXT 2 INPUT connector.
The internal and external 2 sources have multiple uses. However, you can use
each source for only one modulation type at a time. If, for example, you were
using the external 2 source in a frequency modulation configuration for
FM Path 1,
and then you configured the pulse modulation source to also use the external 2
source, the signal generator would turn off
FM Path 1 and assign the external 2
source to your pulse configuration.
Softkey Location: Press
Pulse, Pulse Source
Status after Normal Preset: Internal Pulse
To Next Page
Loading...
