HP ESG Series User Manual

5-36
Hardkey and Softkey Reference
FM
Ext 2 AC-Coupled
This softkey lets you input an external, AC-coupled, frequency modulation signal
to the EXT 2 INPUT connector. The modulation signal is tested for voltage and a
display annunciator will report a high or low condition if the voltage is >
±3% of
1Vpk.
The external 2 input has multiple uses but can be used for only one modulation at
a time. If, for example, you were using the external 2 input in an amplitude
modulation configuration for
AM Path 1, and then you configured FM Path 2 to
also use the external 2 input, the signal generator would turn off
AM Path 1 and
assign the external 2 input to your
FM Path 2 configuration. For the purposes of
this discussion, the external 2 AC-coupled input is the same as the external 2
DC-coupled source.
Softkey Location: Press
FM/ΦM, FM Source, Ext 2 AC-Coupled
SCPI Commands:
[:SOURce]:FM[1]|2:SOURce EXTernal2
[:SOURce]:FM[1]|2:EXTernal[2]:COUPling AC
[:SOURce]:FM[1]|2:EXTernal[2]:COUPling?
Ext 2 DC-Coupled
This softkey lets you input an external, DC-coupled, frequency modulation signal
to the EXT 2 INPUT connector.
The external 2 input has multiple uses but can be used for only one modulation at
a time. If, for example, you were using the external 2 input in an amplitude
modulation configuration for
AM Path 1, and then you configured FM Path 2 to
also use the external 2 input, the signal generator would turn off
AM Path 1 and
assign the external 2 input to your
FM Path 2 configuration. For the purposes of
this discussion, the external 2 AC-coupled input is the same as the external
2C-coupled source.
Softkey Location: Press
FM/ΦM, FM Source, Ext 2 DC-Coupled
SCPI Commands:
[:SOURce]:FM[1]|2:SOURce EXTernal2
[:SOURce]:FM[1]|2:EXTernal[2]:COUPling DC
[:SOURce]:FM[1]|2:EXTernal[2]:COUPling?

HP ESG Series Specifications

General

Brand	HP
Model	ESG Series
Category	Portable Generator
Language	English