HP ESG Series - Delete File; Diagnostic Info

5-174
Hardkey and Softkey Reference
Utility
SCPI Commands:
:MEMory:DELete:STATe
Delete File
Press this softkey to delete a file in the displayed catalog of files. To delete a file,
first select the file from the displayed list by scrolling through the list using the
front panel knob or up and down arrow keys. When the desired file is highlighted,
press
Delete File. Then press the Confirm Delete terminator softkey and the file is
deleted. You cannot recover the file after this step. If you have changed your mind
and do not wish to delete the file, press the
Return front panel hardkey instead.
Softkey Location: Press
Utility, Memory Catalog, Delete File
SCPI Commands:
:MEMory:DELete[:NAME] <filename>
Diagnostic Info
Press this softkey for a display of diagnostic information about the signal
generator. This information included in the display is:
• Instrument model
• Instrument options
• Instrument serial number
• Current firmware revision
• Current firmware date
• Number of hours the signal generator has been powered on
• Number of hours the display has been lit
• Number of power cycles
• Number of attenuator cycles
• Number of reverse power protection trips
Softkey Location: Press Utility, Instrument Info/Help Mode, Diagnostic Info