5-133
Hardkey and Softkey Reference
Recall
Recall
Pressing the front panel Recall key reveals a menu of softkeys. These softkeys are
described in this section in alphabetical order.
Delete All Regs in Seq [n]
Press this softkey to delete the data saved in all of the registers of the selected
sequence. Do not press this softkey until you have selected the correct sequence
using the
Select Seq softkey. For example, if you want to delete the data in all of
the registers that are saved in sequence 4, press
Select Seq. The currently selected
sequence is displayed in the active entry area. Change the number to 4 using the
up and down arrow keys, the front panel knob, or enter a 4 using the numeric
keypad and press the
Enter terminator softkey. Sequence 4 is now displayed in all
softkeys which specify a sequence in this menu. Now press
Delete All Regs in Seq [4] and the data in all of the registers stored in sequence 4
will be deleted. Be certain that you want to delete this data; you cannot recover it
once deleted.
NOTE: This softkey has exactly the same function as the softkey with the identical name in the front
panel Save key menu.
Softkey Location: Press Recall, Delete All Regs in Seq [n]
Delete All Sequences
Press this softkey to delete all of the data in all saved registers of all sequences. Be
certain that you want to delete the data; you cannot recover it once deleted.
NOTE: This softkey has exactly the same function as the softkey with the identical name in the front
panel Save key menu.
Softkey Location: Press Recall, Delete All Sequences
To Next Page
Loading...
Need help?
General
