HP ESG Series - LF out; Bus

5-67
Hardkey and Softkey Reference
LF Out
LF Out
Pressing the front panel LF Out key reveals a menu of softkeys for configuring the
internal low frequency generator. These softkeys are described in this section in
alphabetical order.
Bus
This softkey is one of the choices in the LF Out Sweep Trigger menu. With Bus
selected, you use the HP-IB to trigger single sweeps of swept-sine low frequency
output.
Softkey Location: Press
LF Out, LF Out Source, Function Generator,
LF Out Waveform, Swept-Sine, LF Out Sweep Trigger, Bus
Status after Normal Preset: LF out sweep trigger is set to Immediate
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SWEep:TRIGger BUS
[:SOURce]:LFOutput:FUNCtion:SWEep:TRIGger?