HP ESG Series - HP ESG Series Signal Generators Specifications; Frequency

9-2
Specifications
HP ESG Series Signal Generators Specifications
HP ESG Series Signal Generators Specifications
Specifications describe the instrument’s warranted performance and apply after a
45 minute warm-up. All specifications are valid over the signal generator’s entire
operating and environmental range while in phase noise mode 2, unless otherwise
noted.
Supplemental characteristics (shown in italics and denoted typical or nominal)
provide additional, non-warranted, information useful in applying the signal
generator.
Frequency
Range:
HP ESG-1000A: 250 kHz to 1000 MHz
HP ESG-2000A: 250 kHz to 2000 MHz
HP ESG-3000A: 250 kHz to 3000 MHz
HP ESG-4000A: 250 kHz to 4000 MHz
Underrange: 100 kHz
Resolution: 0.01 Hz
Accuracy: Same as timebase