5-145
Hardkey and Softkey Reference
Save
Select Reg
Press this softkey to choose a register for all softkeys which specify a register in
this menu. For example, if you want to select register 5, press
Select Reg. The
currently selected register is displayed in the active entry area. Change the number
to 5 using the up and down arrow keys, the front panel knob, or enter a 5 using the
numeric keypad and press the
Select Reg terminator softkey. Register 5 is now
displayed in all softkeys which specify a register in this menu.
You can also use this softkey to select a register and save the current instrument
state to that register. For example, if you want to select and save to register 6,
press
Select Reg. The currently selected register is displayed in the active entry
area. Change the number to 6 using the numeric keypad and press the
Save Reg
terminator softkey. Register 6 is now displayed in all softkeys which specify a
register in this menu and the current instrument state has been saved to register 6.
There are 100 registers available (0 through 99) in each of 10 (0 through 9)
sequences. You can use these registers in any combination so long as the total
number of registers used does not exceed 100.
Softkey Location: Press
Save, Select Reg
Select Seq
Press this softkey to choose a sequence for all softkeys which specify a sequence
in this menu. For example, if you want to select sequence 4, press
Select Seq. The
currently selected sequence is displayed in the active entry area. Change the
number to 4 using the up and down arrow keys, the front panel knob, or enter a 4
using the numeric keypad and press the
Enter terminator softkey. Sequence 4 is
now displayed in all softkeys which specify a sequence in this menu.
There are 100 registers available (0 through 99) in each of 10 (0 through 9)
sequences. You can use these registers in any combination so long as the total
number of registers used does not exceed 100.
NOTE: The actual number of states that can be saved may be less if the user file system has
non-instrument state files stored such as sweep/list sequences.
Softkey Location: Press Save, Select Seq
To Next Page
Loading...
