HP ESG Series - Delete All Sequences; Delete Seq[N] Reg[Nn]; Editing Keys

5-143
Hardkey and Softkey Reference
Save
Delete All Sequences
Press this softkey to delete all of the data in all saved registers of all sequences. Be
certain that you want to delete the data; you cannot recover it once deleted.
NOTE: This softkey has exactly the same function as the softkey with the identical name in the front
panel Recall key menu.
Softkey Location: Press Save, Delete All Sequences
Delete Seq[n] Reg[nn]
Press this softkey to delete the contents of a specified register in a specified
sequence. Do not press this softkey until you have selected the correct sequence
and register using the
Select Seq and Select Reg softkeys. For example, if you
want to delete register 5 in sequence 4, press
Select Seq. The currently selected
sequence is displayed in the active entry area. Change the number to 4 using the
up and down arrow keys, the front panel knob, or enter a 4 using the numeric
keypad and press the
Enter terminator softkey. Sequence 4 is now displayed in all
softkeys which specify a sequence number in this menu. Now select register 5,
press
Select Reg. The currently selected register is displayed in the active entry
area. Change the number to 5 in the same way that you changed the sequence
number. Register 5 is now displayed in all softkeys which specify a register
number in this menu. Now press
Delete Seq [4] Reg[05] and register 5, stored in
sequence 4, will be deleted. Be certain that you want to delete the data; you cannot
recover the data once deleted.
NOTE: This softkey has exactly the same function as the softkey with the identical name in the front
panel Recall key menu.
Softkey Location: Press Save, Delete Seq[n] Reg[nn]
Editing Keys
Pressing this softkey reveals a menu of choices for creating and editing the
comment text for the selected register. In this menu you can delete the existing
text in the active entry area (either the existing comment, or comment text that
you have subsequently entered), and you can toggle the editing mode from
inserting text to replacing text.
Softkey Location: Press
Save, Add Comment To Seq[n] Reg[nn], Editing Keys