5-172
Hardkey and Softkey Reference
Utility
Copy File
Press this softkey to copy and rename a file in the displayed catalog of files. To
copy a file, first select the file from the displayed list by scrolling through the list
using the front panel knob or the up and down arrow keys. When the desired file is
highlighted, press
Copy File. The message Copy to: <filename> is displayed
in the active entry area where <filename> is the name of the currently selected
file. Your copied file will have the same name as the original file so you must
rename it. To rename the copied file, the following editing capabilities are
provided:
• The Editing Mode Insert Replace softkey in the Editing Keys menu toggles the
editing mode from inserting text to replacing text. Insertion mode causes text to
be entered in the position directly to the right of the cursor. Replacement mode
causes the text to be entered in the position held by the cursor (replacing any
existing text in that position).
•The Clear Text softkey in the Editing Keys menu deletes all of the existing text in the
active entry area.
•
Use the left and right arrow keys to position the cursor. Use the front panel
knob, or the direct editing softkeys, to enter an alphabetic character, numeral,
or special character.
When you have entered the new file name, press the Enter terminator softkey. If
you have changed your mind, press the
Return hardkey. Once you press Enter, the
new file is stored and displayed immediately in the catalog list.
Softkey Location: Press
Utility, Memory Catalog, Copy File
Delete All Binary Files
Press this softkey to delete all of the binary files in the displayed catalog of files.
You will then confirm that you want to delete all of the binary files in memory.
Press the
Confirm Delete Of Binary Files terminator softkey and all of the files are
deleted. You cannot recover the files after this step. If you have changed your
mind and do not wish to delete the files, press the
Return front panel hardkey
instead.
Softkey Location: Press
Utility, Memory Catalog, Catalog Type, Binary,
More (1 of 2), Delete All Binary Files
SCPI Commands:
:MEMory:DELete:BINary
To Next Page
Loading...
Need help?
General
