HP ESG Series - Simultaneous Modulation; Remote Programming; ISO Compliant

9-15
Specifications
HP ESG Series Signal Generators Specifications
Simultaneous Modulation
All modulation types may be simultaneously enabled, except FM with ΦM, AM,
FM and
ΦM can sum simultaneous inputs from any two sources (Int, EXT 1, and
EXT 2.) Any given source (Int, EXT 1, or EXT 2) may only be routed to one
activated modulation type.
Remote Programming
ISO Compliant
The HP ESG Series RF signal generators are manufactured in an ISO 9001
registered facility in concurrence with Hewlett-Packard’s commitment to quality.
Interface: HP-IB (IEEE-488.2-1987) with Listen and Talk. RS-232
Control Languages: SCPI version 1992.0, also compatibile with
HP 8656B and 8657A/B/C/D/J
1
mnemonics.
1. HP ESG series does not implement HP 8657A/B ‘Standby’ or ‘On’
(R0 or R1, respectively) mnemonics.
Functions Controlled: All front panel functions except power switch and
knobs.
IEEE-488 Functions: SH1, AH1, T6, TE0, L4, LE0, SR1, RL1, PP0, DC1,
DT0, C0, E2